Makita 18V 2 Piece 2 x 1.5Ah Combo Kit DLX2131SY

$299.00

or 4 fortnightly payments of $74.75 with Afterpay More info

4 in stock

SKU: 88381825085 Category:

Description

The new Makita DHP482Z is a compact 18V Hammer Driver Drill to replace its predecessor DHP456Z. Comparing the two models, the new DHP482Z is more compact in size and has a higher fastening torque. The DHP482Z Hammer Driver Drill is designed to suit the needs of all trades people that require a compact 18V tool for drilling and fastening.

  • Mechanical 2 speed gearing selection switch located at the top of the tool allows high or low speed to be selected
  • Single Sleeve keyless chuck allows for easy bit installation and removal with one hand
  • Twin LED Joblight pre glow and after glow function, illuminates more widely then single LED
  • Compact overall length has been reduced to 198mm increasing the maneuverability of the tool
  • All metal gear construction increases the durability of the transmission
  • Ergonomically designed handle has been designed for maximum thrust to the bit with soft grip for comfort
  • XPT eXtreme Protection Technology encasing the electrical components for increased protection against dust and water

Specifications:

  • Voltage: 18V
  • Capacities:
    • Steel: 13mm
    • Wood: 38mm
    • Masonry: 13mm
  • No load speed:
    • Hi: 0-1900rpm
    • Lo: 0-600rpm
  • Impact rate:
    • Hi: 0-28,500ipm
    • Lo: 0-9000ipm
  • Max fastening torque:
    • Hard: 62Nm
    • Soft: 36Nm
  • Length: 198mm
  • Weight: 1.8kg

Makita DTD152Z 18V LXT Li-Ion Cordless Impact Driver – Skin Only – DTD152Z

The new Makita DTD152Z is a compact 18V Impact Driver to replace its predecessor DTD146Z. Comparing the two models, the DTD152Z is more compact in size, lightweight and features high rotation speed. The DTD152Z is designed to suit the needs of carpenters, plumbers, electricians and kitchen fitters for applications such as tightening or drilling screws.

  • Aluminium hammer case – hammer casing has been designed to be light weight and robust
  • One touch installation – driving shank has been designed so that the collar does not have to be pulled back when installing a new bit, only when removing the bit
  • LED job light – twin LED job light with pre glow and afterglow functions
  • Compact design – unit design has been reduced to 137mm
  • Ergonomic design – the grip has been designed to provide comfortable grip and more control while minimising hand fatigue
  • XPT eXtreme Protection Technology – significantly increasing the protection

Specifications:

  • Voltage: 18V
  • Driving shank: 6.35mm
  • Impacts per minute: 0-3500rpm
  • No load speed: 0-2900rpm
  • Max tightening torque: 165Nm
  • Weight: 1.5kg

Makita BL1815N 18V 1.5Ah Li-Ion Slide Battery – BL1815N

  • LXT Lithium-Ion Batteries
  • Built-in Memory Chip – Memorizes the usage history and comm unicates with the charger
  • Less weight – Li-ion battery weighs 40% less than Ni-MH or Ni-Cd
  • Anytime Charge – Lithium-ion batteries have no memory effect and can be charged at any time
  • Charging Technology – Controls current, voltage and temperature to maximize battery life

Specifications:

  • Voltage: 18V
  • Dimensions (L x W x H): 138mm x 41mm x 22mm
  • Amp Hours: 1.5
  • Cell Type: Lithium Ion/Li-Ion

Makita DC18SD 18V Li-Ion Cordless Battery Standard Charger – DC18SD

  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume

Specifications:

  • Voltage: DC 7.2-18V
  • Charge Time: 
    • 1.5Ah: 30mins 
    • 3.0Ah: 60mins
  • Cell Capacity: 1.5Ah – 3.0Ah
  • Length: 151mm
  • Weight: 0.7kg

Brand

Makita

Additional information

Weight 3 kg