Makita DTR180RFE 18V 3.0Ah Li-ion Cordless Brushless Rebar Tying Tool Combo Kit


Afterpay available for orders up to $2,000.00 Learn More

Out of stock

SKU: 088381879040 Category:


Makita DTR180ZK 18V Li-ion Cordless Brushless Rebar Tying Tool – Skin Only – DTR180ZK

The Makita 18V Brushless Rebar Tying tool, DTR180ZK, delivers precision tightness with maximum efficiency in a single handed format. Delivers an impressive tying speed of less that 1 second when tying 2 x D10 rebar and with a primary brushless motor is delivers up to 5000 ties depending on the battery type, making it the perfect tool for large form work jobs!


  • 1 x Hex wrench
  • 1 x Carry case


  • Ultra fast tying ties wire in about 0.95 of a second when tying D10 x D10 rebars
  • Large tying capacity for tying up to 4 x D13 rebar at the same time
  • Ergonomic design with compact slime line design, central weight distribution and ergonomically shaped handle with sure grip rubber
  • Brushless main motor delivers a runtime of over 5,000 ties depending on battery used
  • 2 Mode operation with single action mode for a tie with every trigger press or hold the trigger in continuous mode for rapid tying
  • Easy load wire in just 3 simple steps you can load a wire reel with approximately 120 ties
  • On-tool hex wrench supplied for maintenance of the tie wire path
  • Adjustable tying strength that can be adjusted in 6 stages to optimise tension accordingly to the condition of the material
  • XPT eXtreme Protection Technology protects against dust & moisture


  • Voltage: 18V
  • Tie wire: 0.8mm
  • Appliciable bars: D10 x D10 – (D13 x 2) x (D13 x 2)
  • Tying strench adjust: 6 Stages
  • Length: 304mm
  • Weight: 2.3kg


  • 3 Years Warranty Covered By Makita Australia

Makita BL1830B-L 18V 3.0Ah Li-ion Cordless Battery with Gauge – BL1830B-L


  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Fast 22 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating


  • Voltage: 18V
  • Amp hour: 3.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 60 minutes
  • Weight: 0.6kg


  • 2 Years Warranty covered by Makita Australia

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger  – DC18RC


  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • Forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition


  • Voltage: 18V
  • Cell capacity: 1.5Ah – 6.0Ah
  • Charge Time: 
    • 1.5Ah: 15mins
    • 3.0Ah: 22mins
    • 4.0Ah: 36mins
    • 5.0Ah: 45mins
    • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg


  • 2 Years Warranty Covered By Makita Australia