Makita DLX2317TX1 18V 5.0Ah Li-Ion Cordless Brushless 2pce Combo Kit

$859.00

or 4 fortnightly payments of $214.75 with Afterpay More info

Out of stock

SKU: 20360 Category:

Description

Makita DFS452Z 18V LXT Li-ion Cordless Brushless Screwdriver – Skin Only

Features:

  • Push drive technology – in lock-on mode the motor starts only when the fastener is engaged for work environment and to save battery power
  • Brushless motor is maintenance free and energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling to lower amperage for reduced heat production and increased work amount on a single full battery charge
  • Lock on button for continuous screwdriving
  • Silent clutch
  • One touch locator – allows for easy locator installation/ removal with a single action
  • LED job light with afterglow (lasts 12-13 seconds after trigger release), making it convenient for operation in dark job sites
  • Variable speed control by trigger
  • Battery fuel gauge, indicated in 3 stages
  • Belt hook
  • Ergonomically designed to minimize hand fatigue and pain during long continuous operation, give maximum power thrust, allow for much smoother and easier trigger pull, and provide comfortable grip and better control with enlarged non-slip elastomer
  • Forward/reverse rotation
  • Compatible with all Li-ion 18V Batteries

Specifications:

  • Voltage: 18V
  • No load speed: 0 – 4000rpm
  • Drive shank: 6.35mm (1/4″) Hex
  • Max drilling capacity:
  • Drywall screw: 5mm
  • Self drilling screw: 6mm
  • Noise sound pressure: 72dB(A)
  • Noise K factor: 3db(A)
  • Vibration no load: 2.5m/sec²
  • Vibration K factor: 1.5m/sec²
  • Length: 251mm
  • Weight: 1.7kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver – Skin Only

The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts.

Features:

  • 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode
  • On-the-go single hand impact selection button
  • Impressive 180Nm of max. fastening torque
  • XPT technology that protects against dust & moisture
  • Ultra compact design with twin dual side LED lights

Specifications:

  • Voltage: 18V
  • Drive shank: 6.35mm (1/4″) Hex
  • Max tightening torque: 180Nm
  • No load speed:
  • Max: 0 – 3600rpm
  • Hard: 0 – 3200rpm
  • Med: 0 – 2100rpm
  • Soft: 0 – 1100rpm
  • Impact rate:
  • Max: 0 – 3800ipm
  • Hard: 0 – 3600ipm
  • Med: 0 – 2600ipm
  • Soft: 0 – 1100ipm
  • Max capacity:
  • Standard bolt: M5 – M16
  • High tensile bolt: M5 – M14
  • Length: 116mm
  • Weight: 1kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

Makita 199078-9 Autofeed 25mm-55mm Collated Screw Gun Attachment Set

Includes:

  • 1 x #2 Philips Power Bit (4mm x 130mm)
  • 1 x #2 Square Power Bit (4mm x 130mm)

Suits:

Features:

  • Compact and Lightweight

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Up to 66% more run time per charge compared to BL1830
  • Fast 45 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 5.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 45 minutes
  • Weight: 0.6kg

Warranty:

  • 2 Years Warranty covered by Makita Australia

 

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • Forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:

  • Voltage: 18V
  • Cell capacity: 1.5Ah – 6.0Ah
  • Charge Time: 
  • 1.5Ah: 15mins
  • 3.0Ah: 22mins
  • 4.0Ah: 36mins
  • 5.0Ah: 45mins
  • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia

Makita 199155-7 5-Pack 130mm PH2 Screwdriver Bit

Please Note: These products are only compatible with models DFS250, DFS452, FS2300, FS4300 using the Makita 199078-9 Autofeed Collated Screw Gun

Suits:

  • DFS250
  • DFS452
  • FS2300
  • FS4300

Specifications:

  • Length: 130mm
  • Bit: 6.35mm (1/4)
  • Type: PH 2
  • Quantity: 5