Makita 18V 3.0Ah Li-ion Cordless Brushless Rebar Tying Tool Combo Kit – DTR180RFX1

$2,389.00 inc. GST

Contact For Availabilty

Delivering a cordless tying solution for rebar and steel rod with the 18V Brushless Rebar Tying Tool. The DTR180 has a tying capacity of up to 5,300 ties of 10 x 10mm diameter rebar with a 5.0Ah battery. Tie multiple bars in under one second. The DTR180 can tie up to two 16mm diameter bars or four 12mm diameter bars.

The 18V Brushless Rebar Tying Tool features 2 modes of operation, single or continuous, and a BL Brushless Motor that runs cooler and more efficiently for a longer life than standard motors. Digitally adjust the tying strength to match various tension strength requirements. The DTR180 features an easy-load wire reel design with an automatic locking mechanism built into the protective cover. The tool delivers up to 120 ties of 10mm x 10mm rebar per wire reel for maximum productivity.

Includes:

  • 5 x Wire reels
  • 1 x Belt hook
  • 1 x 2.5mmHex wrench
  • 1 x Carry case

Features:

  • Ultra fast tying ties wire in about 0.95 of a second when tying D10 x D10 rebars
  • Large tying capacity for tying up to 4 x D13 rebar at the same time
  • Ergonomic design with compact slime line design, central weight distribution and ergonomically shaped handle with sure grip rubber
  • Brushless main motor delivers a runtime of over 5,000 ties depending on battery used
  • 2 Mode operation with single action mode for a tie with every trigger press or hold the trigger in continuous mode for rapid tying
  • Easy load wire in just 3 simple steps you can load a wire reel with approximately 120 ties
  • On-tool hex wrench supplied for maintenance of the tie wire path
  • Adjustable tying strength that can be adjusted in 6 stages to optimise tension accordingly to the condition of the material
  • XPT eXtreme Protection Technology protects against dust & moisture

Specifications:

  • Voltage: 18V
  • Tie wire: 0.8mm
  • Appliciable bars: Max 2 x N16
  • Tying strench adjust: 6 Stages
  • Length: 304mm
  • Weight: 2.0kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

Makita BL1830B-L 18V 3.0Ah Li-ion Cordless Battery with Gauge

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Fast 22 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 3.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 60 minutes
  • Weight: 0.6kg

Warranty:

  • 2 Years Warranty covered by Makita Australia

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • Forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:

  • Voltage: 18V
  • Cell capacity: 1.5Ah – 6.0Ah
  • Charge Time:
    • 1.5Ah: 15mins
    • 3.0Ah: 22mins
    • 4.0Ah: 36mins
    • 5.0Ah: 45mins
    • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia
SKU: 0088381725156 Categories: , , GTIN: 0088381725156

Additional information

Brand

Voltage

Sub Categories