Makita DLX2308T 18V 5.0Ah Li-Ion Cordless Brushless 2pce Combo Kit

Makita DLX2308T 18V 5.0Ah Li-Ion Cordless Brushless 2pce Combo Kit

$669.00 inc. GST

In stock
0 out of 5

$669.00 inc. GST

or 4 installments of $167.25 by Afterpay More info

Availability: 56 in stock SKU: 18644

Description

Makita DHP481Z 18V Li-Ion Cordless Brushless Hammer Driver Drill – Skin Only

Features:

  • Single sleeve keyless chuck
  • Wider torque range of 1 – 10Nm in clutch mode allows for versatile applications
  • Mode ring selection
  • Mechanical 2 speed gearing
  • Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
  • All metal gear construction
  • Twin LED job light with after-glow function
  • Battery fuel gauge shows power remaining in battery
  • Single sleeve keyless chuck allows for easy bit installation.removal by one hand
  • High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
  • Extreme Protection Technology with enhanced dust and drip resistant performance

Specifications:

  • Voltage: 18V
  • Impacts Per Minute
  • Hi: 0 – 31,000ipm
  • Lo: 0 – 8,250ipm
  • Max Fastening Torque:
  • Hard: 115Nm
  • Soft: 60Nm
  • Max lock torque: 125Nm
  • No Load Speed:
  • Hi: 0 – 2,100rpm
  • Lo: 0 – 550rpm
  • Capacity:
  • Masonry: 16mm
  • Steel: 13mm
  • Wood: 76mm
  • Dimensions (L x W x H): 205mm x 79mm x 249mm
  • Weight: 2kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

 

Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver – Skin Only

The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts.

Features:

  • 4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode
  • On-the-go single hand impact selection button
  • Impressive 180Nm of max. fastening torque
  • XPT technology that protects against dust & moisture
  • Ultra compact design with twin dual side LED lights

Specifications:

  • Voltage: 18V
  • Drive shank: 6.35mm (1/4″) Hex
  • Max tightening torque: 180Nm
  • No load speed:
  • Max: 0 – 3600rpm
  • Hard: 0 – 3200rpm
  • Med: 0 – 2100rpm
  • Soft: 0 – 1100rpm
  • Impact rate:
  • Max: 0 – 3800ipm
  • Hard: 0 – 3600ipm
  • Med: 0 – 2600ipm
  • Soft: 0 – 1100ipm
  • Max capacity:
  • Standard bolt: M5 – M16
  • High tensile bolt: M5 – M14
  • Length: 116mm
  • Weight: 1kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

 

Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Up to 66% more run time per charge compared to BL1830
  • Fast 45 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 5.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 45 minutes
  • Weight: 0.6kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia

 

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features:

  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • Forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:

  • Voltage: 18V
  • Cell capacity: 1.5Ah – 6.0Ah
  • Charge Time: 
  • 1.5Ah: 15mins
  • 3.0Ah: 22mins
  • 4.0Ah: 36mins
  • 5.0Ah: 45mins
  • 6.0Ah: 55mins
  • Length: 185mm
  • Weight: 0.82kg

Warranty:

  • 2 Years Warranty Covered By Makita Australia

If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.

Free Delivery

Most products are included in free delivery, however some are excluded as follows:

  • Orders and/or items under $99.
  • Orders and/or items that are deemed bulky, large or heavy.
  • Clearance items.
  • Orders that include or items that are classed as dangerous goods.
  • Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.

Returns

Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).

Additional information

Brand

You've just added this product to the cart: